ON THIS WIKI
|Source Mod||Thermal Dynamics|
|ID Name|| |
|First Appearance||MC 1.7.10|
|Affected by Gravity||No|
The Fluctuating Itemduct is a block added by the Thermal Dynamics mod. An advanced smart transport system that interconnects an ME Network, inventories and machines that also conducts energy along its surface at the rate of 2,000 RF per tick per connection. The Itemduct interacts with most mods' machines. Some machines such as the Pulverizer will output to a connected Itemduct automatically. The Itemduct has an Opaque version  that removes the ability to see the items moving inside, it is cheaper to make and may reduce lag. Itemduct (Opaque) will connect to all other Itemducts. By default the Itemduct will send items to the nearest inventory.
'Right click' on the connection with a Crescent Hammer or any Wrench to disconnect, inversely, 'Right click' on the side to be connected. 'Shift+Right-clicking' will remove the duct . To activate extraction supply a Redstone signal or use a Servo.
The type of item extracted may be filtered and Redstone control activation setting changed using a config item such as the Servo or the Retriever to extract from a remote source. A Filter may be used in conjunction with the Servo on the receiving end if the Duct system is used with multiple outputs. 'Right-clicking' the Itemduct connection with a config item will install it, 'Right-clicking' again will open the GUI, where the Redstone signal setting may be changed to Disabled, Low or High. A ghost image of a fluid can be added to the filter inventory and set to White or Black list.
UsageFluctuating Itemduct can be used to create the following items:
The following items may also be of interest: