Thermoelectric Boiler (Mekanism)

This article is in need of a clean-up. You can help the wiki by cleaning up the article.

Thermoelectric Boiler
32px
Name	Thermoelectric Boiler
Source Mod	Mekanism
ID Name	Unknown
Type	Structure
Stackable	Unknown

The Thermoelectric Boiler is a multiblock used to produce vast amounts of steam if supplied with big quantity of Heat and Water. It can be used as an intermediate step between a Fusion Reactor (Mekanism) and the Industrial Turbine, to greatly increase fuel efficiency and energy output.

Construction

The Boiler is a multiblock that has a minimum size of (3x3x4) and a maximum, like all other Mekanism multiblocks of (18x18x18).

It consists of 3 major parts:

• the water tank, containing the superheating elements
• the pressure disperser layer
• the steam tank

Steam Production

The maximum steam production is limited by:

MaxFlow(mb/t) = Water capacity(mb) = ((volume of water tank) - (number of superheaters)) * 16'000mb

MaxFlow(mb/t) = Steam capacity(mb) = (volume of steam tank) * 160'000mb

MaxBoil(mb/t) = (number of superheaters) * 100'000mb/t

Whichever of these 3 is the smallest is your limit.

Maximum flow

Maximum flow that you can get is 67,024,000mb/t

It is 18x18x18 box with pressure dispensers on 16th height and with 671 superheating elements.

Important

The Water tank accounts for ALL the blocks below the Pressure disperser layer, including but not limited to the outer casings!

The Steam tank accounts for ALL the blocks above the Pressure disperser layer, including but not limited to the outer casings!